Electric Pool Heater ELECRO E2-1-12
Rating:
4.5/5
This thermostat is designed specifically for the hot tub, the thermostat is installed in the pipeline. When adding a hot water bath, start the pump, the thermostat automatically heat insulation work, so the water temperature bath is maintained at 39 degrees Celsius, giving your spa to create a more comfortable environment
| Detail Information | |
|---|---|
|
Brand |
ELECRO |
|
Made |
UK |
|
Model (50 Hz) |
E2-1-12 |
|
DISPLAY |
ANALOG |
|
CAPACITY |
12KW |
|
VOLTAGE |
220/1/50 HZ |
|
ELEMENT TYPE |
TITANIUM, HIGH MGO COMPACTION |
|
CURRENT LOAD |
53 AMP |
|
FLOW TUBES |
BS 316L STAINLESS STEEL (EN 1.4432) OR TITANIUM |
|
POWER SUPPLY |
SINGLE PHASE OR 3 PHASE |
|
MIN. FLOW RATE |
MINIMUM flOW: 1-KW TO 6-KW, 1M³/H MINIMUM flOW: 9-KW TO 24-KW, 4M³/H |
|
MAX. FLOW RATE |
MAXIMUM flOW: 17M³/H |
|
HEATING ELEMENT |
GRADE 1 TITANIUM |
|
FLOW TUBE |
GRADE 1 TITANIUM |
|
CONTROL THERMOSTAT |
ANALOGUE: 0 > 45°C (1.2°C DIFFERENTIAL) DIGITAL: 0 > 45°C (0.5°C DIFFERENTIAL) |
|
SAFETY THERMAL CUT OUT |
60°C (MANUAL RESET) |
|
FLOW SWITCH |
GOLD TIPPED REED SWITCH WITH TITANIUM FULCRUM PIN |
|
CONTACTORS |
SIEMENS 3RT2023 OR 3RT2027 |
|
SEALS |
HIGH TEMPERATURE SPECIAL FORMULA EPDM FERRULES. TPE END FI TTING GASKETS |
|
WATER CONNECTION: |
1½” BSP FEMALE THREAD SUPPLIED WITH 1½” / 50MM STEPPED ABS UNIONS FOR RIGID PIPE AND 1½” / 1¼” STEPPED HOSE TAILS FOR FL EXIBLE PIPE |
|
INGRESS PROTECTION RATING |
IP44 |
|
FREQUENCY |
50/60 HZ |
|
WORKING PRESSURE |
4 BAR MAXIMUM |
|
MOUNTING |
FLOOR OR WALL MOUNTING |